The DIY Kit has been designed for easy installation, but please note you will require some basic welding skills due to the old mount needing to be removed from the cross-member & welding the supplied brackets on to the cross-member.  You will also be required to remove one mount from the floor of the vehicle (which will no longer be needed).  No measuring is required, as once the diff is bolted back into the cradle, it will locate itself (please see below photos).  The fitment of the kit (cradle already out) should take no longer than 1 hour to complete.

PARTS LIST

IMS Alloy Diff Hat

1 x set of diff Hat Brackets
2 x M14 x 2.0 x 90 Bolt
4 x M14 Washer
2 x M14 x 2.0 Nyloc Nuts
8 x 5/16 Washers
8 x 5/16 x 1 - 1/4 Bolts
2 x Nissan P/H 55045-06J00 Bushes
1 x Brass 1/8 NPT 3/8 Barb
3 x 3/8 Npt Plugs